العربية
العملة EGP
Sand & Cement SAVETO شراء في القاهرة
شراء Sand & Cement SAVETO
Sand & Cement SAVETO

Sand & Cement SAVETO

من السلع المنتجة
توافر
تحديد السعر من البائع
Shipping:
البائع
مصر, القاهرة
(المكان على الخريطة)
+20( 
عرض الهواتف
الخصائص التقنية
  • تطبيقعالمية
  •  اسم العلامة التجاريةSAVETO Sand & Cement
  • بلد المنشامصر
  • حالة الموادDry mixture
وصف

Description
SAVETO Sand & Cement is a high quality cement-based premixed plaster; it is used internally and externally as an ideal replacement for traditional sand-cement plaster on all types of block walls and all concrete surfaces.

SAVETO Sand & Cement serves as an ideal prior coat for application of putty and paints.

 

Composition
SAVETO Sand & Cement consists of selected graded sand maximum grain size 2.4 mm, and special additives to improve consistency, workability and adhesion to all types of substrates.

Standards
SAVETO Sand & Cement is formulated to comply with BS EN 998 – 1.

Colors
The product is available in grey.

 

Packaging    
Available in 50 kg bags

 

Advantages

  • High quality control system for raw material selection and testing products.
  • Exact mixing ratios (scales and weighing process) with controlled mixing method.
  • Economic, fast and easy to use (mix & apply), only addition of water is required.
  • Excellent bonding, crack free, high resistance to water and extreme weather conditions.
  • Highly recommended in coastal area, due to its pureness and freeness of salts.
  • It is suitable for dry and wet areas, internally and externally.
  • Mix is applied either manually (trowel), or by plastering machine (spraying).
  • Compatible with most types of paintings and coating.

 

Technical Data
  • Binder
  Portland Cement            ASTM   C150
  • Density
  1.6 kg / liter
  • Water Addition
  7 - 9 liters / 50 kg. bag
  • Pot life (24oC) 
  Approx. 2 hrs
  • Flexural Strength
  > 120 Kg / cm2              (after 28 days)
  • Compressive Strength
  < 0.4 %                         (after 28 days)
 

Coat Thickness
Typically (8 – 25) mm

 

Coverage
(3 - 3.5) m2 / 10 mm. thickness / 50 kg bag
Coverage rate is varying depending on the surface condition.

 

Application Procedures

  • Remove dust, oil, grease, loose materials & paints which may affect adhesion with the substrate.
  • Moisten the surface with clean water before application.
  • Put 7 - 9 liters of clean water in a suitable pot, then add one bag of SAVETO Sand & Cement gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps.
  • Let the composition stands for about 10 minutes and mix again.
  • The product now is ready for application either manually (trowel), or by plastering machine (spraying).
  • The plaster should be leveled using a straight bar.
  • The plastered leveled surface should be finished by trowelling till desired smooth surface is achieved.
  • For application on smooth concrete surfaces; use SAVETO Spatter Dash as a scratch coat prior to application of SAVETO Sand & Cement.
  • The plaster must be cured by water spray once every 12 hours for minimum next 48 hours.
  • If the mortar in the pot starts to harden, do not add extra water; just remix till it turns back to the desired consistency.

Cleaning

  • Tools and equipments shall be washed and cleaned with water directly after use.
  • Fresh mortar can be removed with water, but once hardened only mechanical removal is possible.

Storage life
12 months from the date of manufacture under proper shaded storage place away from moisture.

الاتصال بالبائع
Sand & Cement SAVETO
Sand & Cement SAVETO
طريقة التوصيل
قارن0
مسحالعناصر المحددة: 0