Description
SAVETO Pool Fix is high quality cement based premixed dry set mortar for fixing porous and non-porous pool ceramic tiles on all concrete surfaces, fair face concrete, plaster, block walls, glazed and non-glazed pool ceramic and mosaic tiles, all types of cement putties
Composition
SAVETO Pool Fix consists of selected crushed limestone mixed with graded sand maximum grain size 1.2 mm. and special additives to improve consistency, workability and adhesion to all types of substrates.
Standards
SAVETO Pool Fix is formulated to comply with ANSI 118.1 and European standards EN 12004.
Colors
The product is available in white color.
Packing
Available in 25 & 20 kg bags
Advantages
- High quality control system for raw material selection and testing products.
- Exact mixing ratios (scales and weighing process) with controlled mixing method.
- Economic, fast and easy to use (mix & apply), only addition of water is required.
- Excellent bonding, crack free, high resistance to water and extreme weather conditions.
- It is suitable for dry and wet areas, internally and externally.
- Can be used on pool ceramic tiles.
- Non shrinkage mortar.
| Technical Data |
|
|
Portland Cement ASTM C150 |
|
|
1.3 kg / liter |
|
|
6 - 7 liters /20 kg. bag |
|
|
Approx. 2 hrs |
|
|
25 – 30 minutes (Depending on weather
conditions) |
|
|
> 40 Kg / cm2 (after 28 days) |
|
|
> 200 Kg / cm2 (after 28 days) |
|
|
> 10 Kg / cm2 (after 28 days) |
|
|
> 20 Kg / cm2 (after 28 days) |
|
| |
|
|
Coat Thickness
Typically (3 – 10) mm
Depending on type and size of ceramic and mosaic tiles and quality of surface
Coverage
(5 – 6) m2 / 3 mm. thickness / 20 kg bag
Coverage rate is varying depending on the surface condition.
Application Procedures
- Remove dust, oil, grease, loose materials & paints which may affect adhesion with the substrate.
- Moisten the surface with clean water before application.
- Put 6 - 7 liters of clean water in a suitable pot and then add one bag of SAVETO Pool Fix gradually and mix for 3 minutes using a mechanical mixer till the mixture is uniform and free of lumps.
- Let the composition stand for about 10 minutes and mix again.
- The product now is ready for application manually (trowel).
- The joints between tiles can be filled with SAVETO Pool Grout.
- If the mortar in the pot starts to harden, do not add extra water; just remix till it turns back to the desired consistency.
Cleaning
- Tools and equipments shall be washed and cleaned with water directly after use.
- Fresh mortar can be removed with water, but once hardened only mechanical removal is possible.
Storage life
12 months from the date of manufacture under proper shaded storage place away from moisture. |
|
